4BYQ-2.6 Dry Bean Puller – 4-Row Front-Mounted Mechanical Bean Digger

Commercial Dry Bean Puller engineered for efficient 4-row uprooting of kidney, pinto, navy and other dry beans. Front-mounted design with 2.6 m working width, 66–88 kW tractor compatibility and 1.56–2.6 ha/h productivity.

4BYQ-2.6 Dry Bean Puller Product Overview & Function

The 4BYQ-2.6 Dry Bean Puller is a purpose-built 4-row front-mounted mechanical bean digger designed specifically for commercial dry bean harvesting operations. Matched to 66–88 kW (90–120 HP) tractors, this front-mounted dry bean puller uses its spring-tooth picker assembly to gently uproot entire plants while maintaining precise depth control, minimizing soil intake and pod shatter.

With a 2.6 m working width and operating speeds of 6–10 km/h, the unit achieves a field capacity of 1.56–2.6 hectares per hour. The front-mounted suspended hitching system combined with a 2600 mm wheel track delivers exceptional stability and operator visibility. Overall dimensions of 2333 × 2870 × 1182 mm and a structural mass of 1100 kg allow straightforward transport between fields. Uprooted plants are conveyed into a clean, uniform windrow ready for immediate pickup by a dry bean combine or thresher.

As reliable dry bean harvesting equipment, the 4BYQ-2.6 Dry Bean Puller excels in row-cropped kidney bean, pinto bean, navy bean and similar pulse crops. Its spring-tooth system handles varying pod heights and soil conditions without excessive bruising, preserving seed coat integrity and premium market quality. Single-operator control reduces labor costs in an industry where harvest timing directly determines bean grade and selling price.

Model Specifications of 4BYQ-2.6 Dry Bean Puller

Product Details Showcase

Key Challenges Solved for Commercial Growers

Manual dry bean harvesting typically requires 20–40 worker-hours per hectare and exposes crops to weather damage, pod shatter and soil contamination. The 4BYQ-2.6 Dry Bean Puller eliminates these issues by completing uprooting and windrowing in a single pass at 1.56–2.6 ha/h with only one operator.

• Reduces labor costs by up to 80% compared to traditional hand-pulling methods.
• Limits harvest losses to under 3% through controlled spring-tooth action versus 8–12% common in delayed or direct combining.
• Enables precise, timely harvest in narrow weather windows, protecting seed coat quality and securing premium pricing for kidney, pinto and navy beans.
• Front-mounted design provides superior operator visibility, reducing missed rows and field compaction compared to rear-towed units.

Applications of the 4BYQ-2.6 Dry Bean Puller

This front-mounted dry bean puller is optimized for commercial-scale row-cropped dry bean production on 22–30 inch row spacings used for kidney, pinto, navy, black and small red beans. The 2.6 m working width covers four standard rows efficiently, while the front-mounted configuration leaves the rear hitch free for additional implements.

Whether operating on flat prairie soils or gently rolling terrain, the adjustable depth control and 2600 mm wheel track ensure consistent performance. Growers using the 4BYQ-2.6 report faster field turnaround times, enabling same-day combining and reduced exposure of windrows to rain or wind that can degrade bean quality.

Product Installation Method

Installing the 4BYQ-2.6 front-mounted dry bean puller on a compatible tractor is straightforward and takes approximately 15–20 minutes:

• Position the tractor on level ground with the front 3-point hitch lowered. Align the puller’s mounting frame with the tractor’s front hitch points.
• Raise the tractor’s front hitch to engage the lower and upper link pins, then secure with linch pins. Connect the top link and adjust length for level operation.
• Attach the 540 r/min PTO shaft from the tractor’s front PTO to the puller’s input shaft. Ensure the shaft is properly guarded and telescoping sections are locked.
• Connect hydraulic hoses to the tractor’s front auxiliary outlets for depth control and picker lift functions. Verify hydraulic pressure is within 160–200 bar.
• Perform a static test: raise and lower the unit, check PTO rotation at low idle, and confirm wheel track alignment at 2600 mm. Adjust gauge wheels to the desired working depth (typically 8–12 cm).

Once installed, the front-mounted configuration provides unobstructed forward visibility, allowing the operator to maintain precise row alignment throughout the field.

Why Choose Our 4BYQ-2.6 Dry Bean Puller

As an established manufacturer and supplier of industrial bean harvesting equipment for agricultural distributors, we build the 4BYQ-2.6 with heavy-gauge Q345B steel frames, forged spring teeth (HRC 48–52 hardness) and sealed bearings rated for continuous duty. Every commercial dry bean puller for sale undergoes ISO 9001 quality inspection and field testing to guarantee 1.56–2.6 ha/h productivity under real operating conditions. Full technical support, spare parts availability and compatibility with major tractor brands are standard.

Customers achieve measurable reductions in harvest time, lower labor dependency and higher recoverable yields — results consistently documented across thousands of operating hours worldwide.

Frequently Asked Questions

Customer Reviews

Recommended Complementary Equipment

The 4BYQ-2.6 Dry Bean Puller pairs perfectly with our Round Baler Series for efficient residue management after harvest, our Hay Rake Series to form uniform windrows for baling, Mower Series for pre-harvest field preparation, and Hydraulic Reversible Plow for primary tillage in bean rotations. Each complements the front-mounted dry bean puller by streamlining the entire crop cycle, reducing field passes, fuel consumption and soil compaction while maximizing overall farm productivity.