Hydraulic Reversible Plow for 90–240HP Tractors – 15 B2B Models
Hydraulic Reversible Plow, bidirectional turnover design for 90–240 HP tractors, features 180° hydraulic rotation, heavy-duty 140 mm main beam, safety protection and adjustable working width, boosting efficiency and eliminating dead furrows. Get your custom quote today!
Hydraulic Reversible Plow Product Overview
The Hydraulic Reversible Plow is a bidirectional primary tillage tool that rotates 180° between passes via a double-acting hydraulic cylinder. Operators turn furrow slices in one direction on the forward pass and the opposite direction on the return — eliminating the dead furrows and back-furrows that typically waste 8–12% of usable acreage on conventional one-way plows.
This range covers 15 configurations across three structural families: fixed amplitude, horizontal-bar amplitude modulation, and dual/double-wire amplitude modulation. The Hydraulic Turn-over Plow lineup matches tractors from 90 HP up to 240 HP. Smaller 100/100 mm main beam frames stay light enough for orchard headlands, while the 140/140 mm main beam on the 550 and 560 models takes compacted soils that break thinner tools. As a high efficiency hydraulic turnover plow for clay soil, it pairs a 110–130 mm main shaft with safety release on every working body, so a stone strike trips the body — not the frame.
Hydraulic Reversible Plow Model Specifications
| No. | Model | Power (HP) | Parameters |
|---|---|---|---|
| 1 | 535 / 540 | 150–200 | 120/120 main beam, 110 main shaft, secondary safety type, smooth tires |
| 2 | 530 / 535 | 150–200 | 100/120 main beam, 100 main shaft, auxiliary plow with safety, patterned tires |
| 3 | 440 / 445 | 150–200 | 120/120 main beam, 110 main shaft, secondary safety type, smooth tires; tip-to-longest-ridge length 1.27 m |
| 4 | 435 / 440 | 150–200 | 100/120 main beam, 110 main shaft, secondary safety type, smooth tires |
| 5 | 428 Fixed Amplitude | 90–120 | 100/100 main beam, 80 main shaft, small auxiliary plow, iron ground wheel |
| 6 | 430 Fixed Amplitude | 120–150 | 100/100 main beam, 90 main shaft, secondary safety type, patterned tires |
| 7 | 450 Fixed Amplitude | 180–200 | 120/120 main beam, 110 main shaft, auxiliary plow with safety, smooth tires |
| 8 | 360 Fixed Amplitude | 150–200 | 120/120 main beam, 110 main shaft, auxiliary plow with safety, smooth tires |
| 9 | 350 Horizontal Bar Amplitude Modulation | 150–200 | 120/120 main beam, 110 main shaft, auxiliary plow with safety, smooth tires |
| 10 | 450 Horizontal Bar Amplitude Modulation | 180–200 | 120/120 main beam, 110 main shaft, auxiliary plow with safety, smooth tires |
| 11 | 360 Dual Wire Amplitude Modulation | 150–200 | 120/120 main beam, 110 main shaft, auxiliary plow with safety, smooth tires |
| 12 | 450 Double Wire Amplitude Modulation | 180–200 | 120/120 main beam, 110 main shaft, auxiliary plow with safety, smooth tires |
| 13 | 460 Double Wire Amplitude Modulation | 200–220 | 120/120 main beam, 110 main shaft, auxiliary plow with safety, smooth tires |
| 14 | 550 Double Wire Amplitude Modulation | 200–240 | 140/140 main beam, 130 main shaft, auxiliary plow with safety, iron chain ground wheel |
| 15 | 560 Dual Wire Amplitude Modulation | 200–240 | 140/140 main beam, 130 main shaft, auxiliary plow with safety, iron chain ground wheel |
Optional configuration: 60-series upgrade available with raised plow column, extended side panel, and enlarged plow wall for the auxiliary plow body. Specify when ordering.
Hydraulic Reversible Plow for 90–240HP Tractors Product Gallery
90–240HP Tractors Hydraulic Reversible Plow Field Applications
Each Bidirectional reversible plow body inverts and crumbles the top 18–32 cm of soil, burying surface residue and bringing fresh subsoil up. The format suits a wide range of operations:
Stubble Burial
Pasture Renovation
Heavy Clay Soil
Cover Crop Incorporation
Orchard Headlands
Rice Paddy Prep
Contour Plowing on Slopes
Hydraulic Reversible Plow Performance Advantages
Bidirectional turn-over removes the headland back-furrow that traditionally costs 8–12% of plot usable area on long passes.
Main beam from 100×100 mm up to 140×140 mm box section; main shafts of 80–130 mm absorb torsional load on stony ground.
Shear-bolt or auto-reset protection on every body trips on stone strike — protecting the frame and reducing downtime to a 5-minute bolt swap.
Horizontal-bar and dual-wire amplitude-modulation models adjust furrow width on-the-go to match soil resistance and tractor load.
Shares, mouldboards, landsides bolt — not weld — on. Field swap takes 20–30 minutes per body with standard hand tools.
Rotation cylinder runs on sealed bearings — no daily greasing of the turn-over joint, only a seasonal seal inspection.
Why Buy From Us
Frequently Asked Questions
Yes. Wear parts (share, mouldboard, landside) bolt on — a single technician swaps them in 20–30 minutes. The hydraulic turn-over cylinder runs on sealed bearings, so the rotation joint requires no daily greasing — just a seasonal seal check.
Match HP to model: 90–120 HP for the 428 fixed amplitude, 150–200 HP for most 4–5 furrow units, and 200–240 HP for the 550 and 560 with 140 mm beams. Underpowering loses depth in clay; overpowering rarely damages the frame.
The 110–130 mm main shaft plus per-body shear-bolt or auto-reset safety is built for compacted clay and stones. For consistent sub-25 cm depth, choose the 535/540 or 560 — wider main beams resist torsional flex on rocky ground.
About 45–60 minutes if your tractor has a Cat. II/III three-point hitch and two hydraulic remotes. That covers attaching the top link, connecting hoses, setting working depth via the gauge wheel, and a level test pass.
Yes. Wear parts (shares, mouldboards, landsides, shear bolts) are stocked for every model and ship by air or sea freight to most regions in 5–14 days. A spare-parts kit covering the first 1,000 hectares ships with each new plow.
12 months on the cylinder and frame from delivery date, covering manufacturing defects. Hoses, seals, and wear parts are excluded. Extended 24-month coverage is available for orders of five units or more.
What Buyers Are Saying
Recommended Pairings for a Complete Field Setup
The Hydraulic Reversible Plow is the primary tillage tool — but its performance depends on what it's mounted to and what's plumbed into it. The pairings below are the components most buyers order alongside it.
The plow is only as productive as the tractor pulling it. Match HP to the model spec, and ensure tractor weight is at least 1.3× the plow's draft load — otherwise the front wheels lift on engagement.
The plow itself is hydraulic, not PTO-driven, but most operators run a power harrow or seedbed combinator on the tractor's PTO during return passes — so a properly sized PTO shaft is part of the same field kit.
The 180° turn-over relies on a double-acting cylinder, two hoses, quick couplers, and a pressure-relief valve. We supply replacement cylinders, ISO-A or ISO-B couplers, and 3/8" hose assemblies in matched sets.
Cat. II and Cat. III lower-link pins, lynch pins, and a hardened top link. A worn or wrong-size pin is the most common cause of unwanted angle change during plowing.
Spare shares, mouldboards, landsides, and shear bolts sized for your specific model. Buying the kit with the plow saves 30–40% versus single-line orders later.
Get a Quote on Your Plow Configuration
Send us your tractor HP, target soil type, and acreage — we'll come back with the right model, an estimated draft load, and a delivered FOB price within 24 working hours.
Building out a full hay or harvest line? We also manufacture Round Baler Series, Hay Rake Series, Mower Series, Disc Harrow Series, and Other Series — bundle pricing is available when ordering plow + tillage + harvest equipment together.
Informazioni aggiuntive
| editor | wm |
|---|
Get In Touch
Ready to Source Hay Balers from a Trusted Manufacturer?
Tell us your application — bale size, tractor power, target market — and our engineers will respond within 12 business hours with a tailored quotation, sample plan and shipping schedule.